ホーム > 製品情報 > DC電子負荷 > 1200V DC電子負荷 > 1200V 4400Wプログラム可能なDC電子負荷
  • 製品の説明
Overview
製品の属性

モデルEL1200VDC4400W

ブランドap

原産地中国

Input Voltage0~1200V

Input Current0~160A

Input Power0~4400W

Voltage Readback Accuracy0.015%+0.015%F.S.

Current Readback Accuracy0.04%+0.06%F.S.

Power Readback Accuracy0.1%+0.1%F.S.

Height3U

Warranty2 years

InterfaceRS232/RS485/USB(Standard)

供給能力と追加情報

包装カートン

生産高other

輸送方法Ocean,Land,Air

原産地中国

についてのサポートother

認証 ISO9001/CE/ROHS/CSA/UL

HSコード8543709990

ポートDHL

お支払い方法の種類T/T

インコタームズEXW

梱包と配送
販売単位:
Piece/Pieces
パッケージ型式:
カートン
写真の例:

APM techonogies programmable DC electr onic load 1200V 4400W can be switched quickly between different values in the same operating mode, including CC dynamic mode, CV dynamic mode, CR dynamic mode and CP dynamic mode, CC/CR high speed dynamic mode up to 50kHz. This function is suitable for transient test of power supply, test of battery protection characteristic and battery pulse charging etc. Dynamic mode test has continuous mode, pulse mode and toggle mode.

APM techonogies also have 200V DC Electronic Load and 600V DC Electronic Load for lower voltage options.Two or more loads can be connected in master-slave parallel mode to provide more power or current capacity to make Dc Electronic Load System with 200V DC Electronic Load System,600V DC Electronic Load System,1200V DC Electronic Load System.

Functions & Advantages:

Flippable Front Panel and Color Touch Screen
This series programmable DC electronic load is equipped with flippable front panel for 4U, 7U, 10U and 13U height models. Together with a large color touch screen provides simple and fast operation for customer. Real-time update of display input data, status and graphical display makes it more intuitive.


Multiple Operating Mode

This series programmable DC electronic load provides four kinds of basic operating mode including CV (constant voltage), CC (constant current), CR (constant resistance), CP (constant power), to satisfy a wide range of test requirements.


Adjustable CV Loop Speed
This series electronic load supports CV loop response speed setting to FAST, NORMAL or SLOW to satisfy different test requirements. This function may avoid the inaccurate measurement or testing fail caused by the response speed mismatch between the load and the power supply, which is possible to improve test efficiency and reduce costs on the equipments, time and expenses.


Dynamic Load

This series electronic load can be switched quickly between different values in the same operating mode, including CC dynamic mode, CV dynamic mode, CR dynamic mode and CP dynamic mode, CC/CR high speed dynamic mode up to 50kHz. This function is suitable for transient test of power supply, test of battery protection characteristic and battery pulse charging etc. Dynamic mode test has continuous mode, pulse mode and toggle mode.


Sine Wave Dynamic Load
This series electronic load supports sine wave loading function which allows to load sine wave,can be used for impedance analysis test of fuel cells.


Dynamic Frequency Sweep Function

This series electronic load provides a unique constant current dynamic sweep to use frequency conversion to find out the UUT voltage of worst case.
This CC dynamic sweep allows the user to edit two load levels, start frequency, end frequency, step frequency, dwell etc.
The sampling rate is up to 500kHz, which make it can simulate different loading conditions for most test requirements.


Battery Discharge Test
This series electronic load has battery discharge function, and can perform discharge test under CC, CR or CP mode. The DC load can set end voltage or time to stop loading correctly and make sure the battery is not damaged due to over discharge. The user can set stop conditions, whenever met any condition, the load will stop loading and counting automatically. During the test, users can observe battery's voltage, discharging time and already-discharged-capacity.

Auto Mode

This mode allows automatically switches among CV, CR, CC and CP modes. It is suitable for lithium ion battery charger testing to get a complete VI charging curve. This flexible auto mode also enormously improve test efficiency.


OCP/OPP Tests

This series electronic load provides OCP and OPP modes are mainly applied in over-current and over-power points tests. After the testing the load can automatically judge the test result according to the set specifications. Take OPP testing as example, the OPP provides ramped up power for the load to test the UUT voltage whether has reached trigger voltage level and to judge if the protection is acting normally or not.


List Mode

The list function allows user to create waveform files to automatically simulate various complicated loading conditions. The list mode has 10 files, by editing operating mode (including CC, CV, CR,CP, Short and ON/OFF), repeat times, total steps, setting value of each step and step time etc. This function can be applied to the testing of output characteristic and stability for power supply.


Master/Slave Control

This series electronic load provides the user with Master/slave mode, supports parallel connection under different power and same voltage and dynamically synchronized. In Master/slave mode, the user only need to control the master one, the load current will be automatically calculated and downloaded to the slave loads. The Master/slave mode greatly simplifies the operation when increased power is needed.


External Control and Current/Voltage Monitoring

This series electronic load has analog control interface to control the input voltage and current. The external signal 0 to 10V controls the sinking condition from 0 to full scale. Using the external control mode can simulate arbitrary waveform which is ideal for industrial control requirement.
The 0 to 10V analog output signal of V-MON/I-MON terminals represent input to which the terminals belong from 0 to full range.
An external voltmeter or oscilloscope can be connected to display input voltage/current change.


製品グループ : DC電子負荷 > 1200V DC電子負荷

会社概要
APM Technologies( Dongguan )Co。、Ltd。は、研究開発(R&D)、マリンスマートシステム(MSS)の生産と流通に特化したハイテク企業です。製造機器。当社は、製品計画、研究開発、実験室実験、テスト、および品質管理の完全なシステムを持っています。さらに、ISO 9001標準認定に合格しました。 APM TechnologiesのR&Dチームは、博士号を含む100人以上の人員で構成されています。関連業界の上級専門家だけでなく、修士号の保有者も同様です。多くの国内および国際的な研究チームと協力し、大手の大学との長期的な戦略的協力を維持することにより、当社は製品とサービスが業界をリードすることを保証することができます。継続的に革新して突破するための専門的な技術と技術を適用することにより、これまでのところ、APMテクノロジーは多くの発明特許に適用されており、すでに多くのユーティリティ特許、設計特許、ソフトウェア著作権、およびその他の関連特許を取得しています。当社の製品は、CE、VDE、SAA、CQC、CSA、FCCなどを通過しました。 APMテクノロジーは、最初から現在まで、そして過去から未来へと、「卓越したサービスの絶え間ない追求」という会社の精神を常に維持して、顧客に「1日24時間の継続サービス」を提供します。
会社の写真
生産認証
ダウンロード
ホーム > 製品情報 > DC電子負荷 > 1200V DC電子負荷 > 1200V 4400Wプログラム可能なDC電子負荷
この仕入先にメール
  • *タイトル:
  • *に:
    Ms. Emily Cui
  • *イーメール:
  • *メッセージ:
    あなたのメッセージは20から8000文字の間でなければなりません
お問い合わせ
*
*

ホーム

Product

Phone

私たちに関しては

お問い合わせ

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

送信